Onan MDKBT User Manual

5-8
HIGH EXHAUST TEMPERATURE
SWITCH (S5)
WARNING
Accidental or remote starting can
cause severe personal injury or death. Before
removing a panel or access door, disconnect
the negative (−) cable at the battery to prevent
the engine from starting.
The high exhaust temperature switch is secured to
the side of the water/exhaust mixer (Figure 5-8 or
5-9).
LOW COOLANT LEVEL SWITCH (S3)
When provided, this switch is threaded into the cool-
ant reservoir (Figure 5-7, 5-8 or 5-9). Use thread
sealant when remounting the switch.
HIGH EXHAUST
TEMPERATURE
SWITCH S6
LOW COOLANT
LEVEL SWITCH S3
FIGURE 5-8. LOW COOLANT LEVEL & HIGH
EXHAUST TEMPERATURE SWITCHES—MDKBL,
MDKBK, MDKBM, MDKBN
LOW
COOLANT
LEVEL
SWITCH
S3
HIGH EXHAUST
TEMPERATURE SWITCH S6
FIGURE 5-9. LOW COOLANT LEVEL & HIGH
EXHAUST TEMPERATURE SWITCHES—MDKBP,
MDKBR, MDKBS
Redistribution or publication of this document, 
by any means, is strictly prohibited.

Onan MDKBT Specifications

General

Brand	Onan
Model	MDKBT
Category	Portable Generator
Language	English