Onkyo M-5000R Instruction Manual

20
En
Turning On & Basic Operations
Basic Operations
Tip
• After a certain period of warming up, the temperature of the
power amplifier’s components and internal temperature are
stabilized, and the sound will soften.
Note
• The power amplifier remembers the state when power was
previously turned off, and returns to the state.
Note
• See “Setting Auto Standby (ASb)” for the auto standby function
(➔ 21).
Turning On the Power Amplifier
1
Set POWER to the ON position (^) on the front
panel.
2
Press ON/STANDBY to turn on the power
amplifier.
The power amplifier comes on, the display lights, and
the Standby LED goes off.
POWERON/STANDBY
Turning Off the Power Amplifier
1
Press ON/STANDBY to set the power amplifier to
Standby.
The power amplifier will enter Standby mode, and the
Standby LED lights.
2
To completely shut down the power amplifier, set
POWER to the OFF position (@).
POWERON/STANDBY
Standby LED

Onkyo M-5000R Specifications

General

Damping factor	130
Amplifier class	-
Frequency range	1 - 250000 Hz
Input sensitivity	700 mV
Audio output channels	2.0 channels
Peak power per channel	150 W
Signal-to-Noise Ratio (SNR)	110 dB
Total Harmonic Distortion (THD)	0.02 %
Dynamic power per channel (2 Ohm)	320 W
Dynamic power per channel (3 Ohm)	245 W
Dynamic power per channel (4 Ohm)	196 W
Dynamic power per channel (6 Ohm)	142 W
Dynamic power per channel (8 Ohm)	110 W
RMS power output per channel (8 Ohm)	80 W
XLR out	1
Speakers connectivity type	RCA
Purpose	Home
On/off switch	Yes
Product color	Silver
Cables included	AC
Connectivity technology	Wired
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (typical)	280 W
Package weight	27000 g

Weight and Dimensions

Depth	432.5 mm
Width	435 mm
Height	187.5 mm
Weight	23500 g