To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Onkyo TX-NR696-S and is the answer not in the manual?
General| THX-certified | THX Select |
|---|---|
| 3D | Yes |
| Supported graphics resolutions | 3840 x 2160 |
| HDCP version | 2.2 |
| Apple docking | - |
| Product color | Silver |
| Audio decoders | DTS Virtual:X, DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Surround, Dolby TrueHD |
| Volume control | Rotary |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Preset stations quantity | 40 |
| Internet radio services supported | Deezer, Spotify, Tidal, TuneIn |
| Receiver type | Surround |
| Output impedance | 470 Ω |
| Input sensitivity | 200 mV |
| Audio output channels | 7.2 channels |
| Signal-to-Noise Ratio (SNR) | 106 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Dynamic power per channel (3 Ohm) | 240 W |
| Dynamic power per channel (4 Ohm) | 210 W |
| Dynamic power per channel (8 Ohm) | 120 W |
| Power output per channel (1KHz@6 Ohm) | 175 W |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| Audio formats supported | AIFF, ALAC, DSD, FLAC, WAV |
| HDMI in | 7 |
| Digital audio optical in | 1 |
| Headphone connectivity | 6.3 mm |
| Number of HDMI outputs | 2 |
| Phono inputs (RCA) | 4 |
| Connectivity technology | Wired & Wireless |
| AC input voltage | 220-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.15 W |
| Power consumption (typical) | 570 W |
| Package depth | 468 mm |
| Package width | 534 mm |
| Package height | 265 mm |
| Package weight | 12500 g |
| Optical drive included | No |
Weight and Dimensions| Depth | 379.5 mm |
|---|---|
| Width | 435 mm |
| Height | 173.5 mm |
| Weight | 10000 g |
