23
If you experience a problem with your
projector, please refer to the following
information. If a problem persists, please
contact your local retailer or service
center.
Image Problems
No image appears on-screen
!"""#$80'&"%:&"+?U7&8C+:?'F&'C
battery are correctly and securely
connected.
!"""#$80'&"%:&"3-$8"2)"+2$$&+%2'8"?'&"
not crooked or broken.
!"""[?X&"80'&"%:&"3'2\&+%2'"-8"
switched on.
Image is out of focus
!"""V6\08%"%:&"N2+08"M-?7@
!"""[?X&"80'&"%:&"3'2\&+%-2$"8+'&&$"
is between the required distance
9.6 to 150 inches (0.245 to 3.810
meters) from the projector. See
page 5.
Image is too small or too large
!"""[25&"%:&"3'2\&+%2'"+728&'"%2"2'"
further from the screen.
Image is reversed
!"""D&7&+%"]D&%03"^^_"M-837?4"-->
Projection” from the OSD and set
the projection direction.
Audio Problems
No sound
!" During video or music playback,
press or to adjust the
volume.
Battery Problems
Battery capacity is low
!"""B&/25&"%:&"U?%%&'4"?$6"+7&?$"%:&"
connectors.
!"""1:&"U?%%&'4"-8".2'$"20%"?$6"$&&68"
to be replaced.
!"""1:&"U?%%&'4"/?4"$2%"+:?'F&"
correctly after the projector
is turned off due to the high
temperature emitted by the
projector. Let the projector cool
for a while before connecting the
charger.
LED Indicator
LED Color
Description
No light In operation
Red Battery is charging
Green Battery is fully charged
When a computer is connected via USB, the projector automatically detects the
connection and the message below appears on screen.
Yes
No
<Note>
Displayed screen varies
depending on the last session.
Returns to the previous screen
1.
Confirm Transfer
<Note>
The screen turns black after 60 seconds for
power saving. Press
to wake up the display.
or
2.
Upload Files by Computer
3.
Unplug the USB Cable
<Note>
Check your computer for the upload status.
When upload is complete, you must unplug the
USB cable to display the Home menu.
<Note>
Files can be transferred to the internal memory or microSD card if installed.
To Next Page
Loading...
Need help?
General
