12
“NO WATERING PERIOD/TIME”
When a restricted time is entered, all watering programs that fall
on a restricted watering time will be shifted to a non-restricted day
and/or time.
To program “No Watering Period/Time”
1. Turn the rotary dial to NO WATERING
2. Press the RAIN DELAY button once. [See Figure 20]
3. Enter the starting time of the “No Water Period” using the +
and – buttons and press ENTER to accept time.
4. Next set the ending time of the “No Water Period” using the
+
and – buttons and press ENTER to accept time.
5. Return rotary dial to the AUTO position.
Set Master Valve or Pump Start
This sprinkler timer allows each station to operate with or without
pump. If a station is set to operate with the pump, it will start two
seconds before the station does.
Note: A Pump Start Relay is required to operate pump. (Sold separately)
TO ACTIVATE “PUMP START” FOR EACH STATION:
1. Turn the rotary dial to the •PUMP position.
2. Press the RAIN DELAY button once. [See Figure 21]
3. If you want the pump to be active for the displayed station,
press ENTER.
4. If you
do not want the pump to be active for the displayed
station press CLEAR.
5. Press NEXT to advance to the next station.
6. Turn the rotary dial to exit this setting.
5. To interrupt or discontinue this cycle, press the CLEAR
button once.
At the completion of this function, the sprinkler timer reverts back
to your normal automatic watering plan.
Note: If the manual operation is started during an automatic program
cycle, the automatic program will be cancelled.
MULTIPLE STATIONS—WATER ONLY STATIONS ASSIGNED
TO A SINGLE PROGRAM (A, B OR C)
For this example we will water all stations assigned to Program B.
This procedure will be the same for both Program A and C.
1. Ensure the rotary selector is on the AUTO position.
2. Press the MANUAL button once.
3. Continue to press the
NEXT button until you see “B EXTRA
ALL” [See Figure 18]
4. Press the ENTER button, within 30 seconds, to activate
manual watering.
5. To interrupt or discontinue this cycle, press the CLEAR
button once.
Note: In this example stations assigned to Program “B” will water one at a
time in sequence.
Section 6: Additional Features
No Watering
“No watering” allows the homeowner to input the restricted water
day(s) and/or period (time), imposed by local water districts. This
feature prevents the homeowner from watering during restricted
days and times.
“NO WATERING” DAY(S) OF WEEK
When restricted day(s) are entered, all watering programs that fall on
a restricted day will not water on that day.
To program “No Water Day(s)”:
1. Turn the rotary dial to
NO WATERING
2. Press the NEXT button until the desired day of week flashes
and press CLEAR. [See Figure 19]
Note: Days entered as No Watering days will NOT have a water drop
icon above the day
3. Repeat step 2 until the water drop icon is removed above all
restricted days.
4. To remove a “No Watering” restriction from a day press
the NEXT button until the day flashes and press the ENTER
button.
To Next Page
Loading...
Need help?
General