74
VQT2J34
Display and Connection Settings/System Settings
3, 4 select “Display” > 1 > 3, 4 select item
>
3, 4 select “Connection” > 1 > 3, 4 select item
>
>
Others
>
Setup
(> 70, Accessing the Setup Menu)
All factory default settings are indicated with “Underlined” text.
Display
On-Screen Messages
Choose the approximate time until the digital channel information
screen (> 44) disappears automatically.
The length of time the Control Panel (> 43) is displayed can also be
changed, but “Off” does not work.
[Off] The digital channel information is not displayed.
[3 sec.] [5 sec.
] [7 sec.] [10 sec.]
Unit’s Display
Changes the brightness of the unit’s display.
Regardless of the setting, when “Power Save in Standby” (> 76) is
activated and this unit is turned off, the unit’s display is turned off.
[Bright
][Dim]
New Channel Message
Set whether to display the confirmation message when a DVB
channel is added.
[Automatic
] When a new DVB channel is added the unit will be
informed automatically.
[Off] The Channel Messages are not shown.
Screen Saver
[On] When this unit is not operated for approximately 5 minutes
while the screen is being displayed, the screen saver is
displayed. To return to the previous screen, press [OK].
[Off]
FUNCTION MENU Display
[On] When the unit is turned on, the FUNCTION MENU will be
displayed. (> 41)
[Off
]
OK
Setup
Picture
Sound
Display
Connection
Tuning
Others
RETURN
SELECT
TAB
Disc
Unit’s Display
On-Screen Messages
5 sec.
Bright
Screen Saver
On
FUNCTION MENU Display
Off
Automatic
New Channel Message
Connection
TV Aspect
This setting needs to be changed when connected to a 4:3 standard
aspect TV.
[16:9
] [4:3] [Letterbox]
Notes
Aspect 4:3/16:9
4:3 standard aspect television 16:9 widescreen television
≥ [16:9]: When connected to a 16:9 widescreen
television.
≥ [4:3]: When connected to a 4:3 aspect
television, side picture is
trimmed for 16:9 picture (> 93,
Pan & Scan).
≥
[Letterbox]:
When connected to a 4:3 aspect
television, widescreen picture is
shown in the letterbox style
(> 93).
TV System
Change this setting if you connect an NTSC television or to record
NTSC video from another source.
1. Press [3, 4] to select the TV System, then press
[OK].
[PAL]
– Select when connecting to a PAL or Multi-system television.
Programmes recorded using NTSC are played as PAL 60.
– Select to record television programmes and PAL input from
other equipment.
– [HDD] Select when playing a PAL input title recorded on the
HDD.
[NTSC]
– Select when connecting to an NTSC television.
Television programmes cannot be recorded properly.
– Select to record NTSC input from other equipment.
– [HDD] Select when playing an NTSC input title recorded on the
HDD.
The confirmation screen appears.
2. Press [2] to select “Yes”, then press [OK].
Tips
To change the setting all at once (PAL/NTSC)
While stopped, press and hold [∫] and [< OPEN/CLOSE] on the
main unit simultaneously for about 5 seconds.
Notes
≥This unit cannot record NTSC signals to discs that already have
PAL signal recordings. (However, both types of programmes can
be recorded onto the HDD.)
≥If “NTSC” has been selected, the TV Guide system cannot be
used.
≥
During recording, timer recording standby or EXT LINK standby, this
unit cannot play discs that do not match the “TV System” (PAL/NTSC)
setting. Set “TV System” to match the discs before playing them.
Change back the setting after playback of disc, otherwise recording
may not record propery.
OK
Setup
Picture
Sound
Display
Connection
Tuning
Others
Disc
TV Aspect
16:9
HDMI Settings
AV 1 Output
Video
AV 2 Settings
PAL
TV System
RETURN
TAB
SELECT
4:3 16:9
DMR-EX773EB_VQT2J34-B.book 74 ページ ２０１０年１月７日 木曜日 午後５時８分
To Next Page
Loading...
Need help?
General
