Panasonic Diga DMR-EX99VEB User Manual

102
VQT2J45
Troubleshooting Guide
Timer recording does not stop even when [∫] is
pressed.
¾ When using the linked timer recording with external
equipment, press [EXT LINK]. (“EXT-L” on the unit’s display
disappears.) (> 30)
¾ If you start recording immediately after turning on the unit
while “Power Save in Standby” is not activated (Quick Start
mode), you cannot then stop recording for a few seconds.
¾ Make sure that the recording drive is selected. Press
[DRIVE SELECT] to select the recording drive. (> 22)
The timer programme remains even after recording
finishes.
¾ The timer programme remains if set to daily, weekly or
series timer recording. (> 32, 33, 36)
Part or all of a recorded title has been lost.
¾ If the power shuts down or the AC mains lead is
disconnected from the household mains socket while
recording or editing, the title may be lost or the HDD/disc
may become unusable. We cannot offer any guarantee
regarding lost titles or discs. You will have to format the disc
([HDD] [RAM] [-RW‹V›] [+RW]) or use a new disc. (> 76)
Cannot copy VHS to HDD/DVD.
¾ The disc is protected with the “DVD Management” settings.
(> 76)
¾ Some video tapes on the market (including rental videos)
are copy-protected to prevent illegal reproductions.
Copy-protected video tapes cannot be properly recorded.
¾ You cannot copy using the One Touch Copying operation
button while the FUNCTION MENU, the Timer Recording
List screen, etc. are displayed.
Cannot copy HDD/DVD to VHS.
¾ A video cassette without the accidental erasure prevention
tab is inserted. Use a video cassette with an accidental
erasure prevention tab.
¾ Some DVDs on the market (including rental DVD) are
copy-protected to prevent illegal reproductions.
Copy-protected DVDs cannot be properly recorded.
The sound level after editing is not equal on HDD/
DVD and on VHS.
¾ The sound level on HDD/DVD and VHS may not match
depending on the disc.
When the sound level in a particular part of the sound
source is soft or loud, the sound may be recorded loudly or
softly on a video tape.
Stripe-shaped black noise is recorded.
¾ An external playback device is interfering with the TV
because the device is too close to the TV. Move the device
away from the TV.
The programme name and the recorded title do not
match.
¾ There was a programme change after timer recording was
set but the recorded title still has the old programme name.
Cannot copy to a DVD-R, etc, disc using the high
speed mode.
¾ When recording to the HDD, set “Recording Format” to
“Video format” in the Setup menu. (The default setting is
“Video format”). (> 80)
¾ In the following cases, high speed mode does not work,
even if the titles were recorded with “Recording Format” set
to “Video format”. (> 80)
– [+R] [+R]DL] [+RW] If recorded in “EP” or “FR (recordings 5
hours or longer)” mode
– [+R] [+R]D L ] [+ RW] If recorded in 16:9 aspect
– [-R] [-R]DL ] [-RW‹V›] If recorded in 16:9 aspect using “EP”
mode or “FR” (recordings 5 hours or longer) mode
¾ [+R] [+R]DL] [+RW] Titles recorded on other Panasonic DVD
Recorders with “Recording Format” (“Rec for High Speed
Copy”) set to “Video format” (“On”), and then copied to the
HDD on this unit may not copy to +R, +R DL or +RW discs
with high-speed copy.
When copying, it takes a long time even in high
speed mode.
¾ Use a disc that is compatible with high speed recording.
Even if the disc is high speed recording compatible, the
maximum speed may not be possible due to the condition
of the disc.
¾ It takes longer than normal to copy many titles.
¾ You cannot high speed copy to DVD-R titles longer than 6
hours when using other Panasonic DVD Recorders that are
not compatible with EP (8 Hours) mode recording.
An unusually loud sound is coming from the
rotating DVD-R, etc.
¾ When recording or high speed copying to a DVD-R, DVD-
R DL, DVD-RW (DVD-Video format), +R, +R DL and +RW
the sound of the disc rotating may be louder than normal,
however, this is not a problem.
Cannot record video or sound from the external
device.
¾ The external device is not correctly connected. (> 11, 12,
31, 86, 87)
¾ The proper external input channel (AV2 or AV3) is not
selected. Press [INPUT SELECT] to change.
“1” flashes when I try to start recording.
Cannot record.
¾ A video cassette is not inserted. Insert a video cassette
with an accidental erasure prevention tab. (> 89)
¾ The accidental erasure prevention tab has been removed.
Cover the hole with adhesive tape. (> 89)
Recording Issues:
Recording/Timer
Recording/Copying/
External input
(Continued)
Recording Issues: VHS Recording
DMR-EX99VEB_VQT2J45.book 102 ページ ２０１０年１月７日 木曜日 午後１時４１分

Panasonic Diga DMR-EX99VEB Specifications

General

Brand	Panasonic
Model	Diga DMR-EX99VEB
Category	DVD Recorder
Language	English