124
4K Photo and Drive Settings
Recording with the 4K Photo function and selecting pictures to save
Selecting pictures from 4K burst file and saving
1
Select a picture with the [ ] on the playback screen,
and press
• The same operation can be performed by touching [ ].
• In the case of recording with [
] ([4K Pre-Burst]), proceed to
the step
3
.
2
Drag the slide bar to perform rough scene selection
• For information on how to operate the slide view screen, refer to
(→125).
• If you touch [
] (or press the [Fn1] button), you can choose a
scene in the 4K burst playback screen. (→126)
Slide view screen
3
Drag to select the frame you want to save as a picture
• The same operation can be performed using .
4
Touch [ ] to save the picture
• The selected picture will be saved as a new picture in the JPEG format separate from the 4K
burst file.
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
If you use [4K PHOTO Bulk Saving] in the [Playback] menu, you can bulk save 5 seconds’
worth of 4K recording. (→242)
To Next Page
Loading...
Need help?
General
