36
Preparations
Attaching/Removing the Lens
• Check that the camera is turned off.
• When attaching or detaching the interchangeable lens (H-FS12032/H-FS35100), retract
the lens barrel.
• Change lenses where there is not a lot of dirt or dust. Refer to (→334) when dirt or dust
gets on the lens.
â–
Attaching the lens
• When a lens rear cap is attached to the lens, detach it.
• When a body cap is attached to the camera, detach it.
Align the lens fitting marks ( ) and then rotate the lens in the direction of the arrow
until it clicks
• Do not press the lens release button ( ) when you attach a lens.
• Do not try to attach the lens when holding it at an angle to the camera body as the lens mount
may get scratched.
To Next Page
Loading...
Need help?
General
