Technical use
72
Setting up the Operational Sound/Shutter
Sound
It is possible to set the electronic shutter
sound when the shutter button is pressed all
the way and to set the sound volume when
the shutter button is pressed halfway and
when the menu operations are done.
ª When the operational mode dial is set
to REC mode
1
Press the [MENU] button.
2
Press 1 to open the setup menu
.
• In simple mode, skip this step.
3
Press 3/4 to select [BEEP] and then
press 1
.
4
Pressing 3/4/2/1
to adjust the
operational sound volume and set the
shutter sound.
5
Press the [MENU] button twice.
• The menu will disappear.
ª When the operational mode dial is set
to playback [ ]
1
Press the [MENU] button.
2
Press 1 to open the setup menu
.
3
Press 3/4 to select [BEEP].
4
Press 2/1 to adjust the operational
sound volume
.
5
Press the [MENU] button.
• The menu will disappear.
• In simple mode [ ], the setting becomes [ON] or [OFF].
1,5
1,5
2,3,4
2,3,4
SELECT SET EXIT
MENU
BEEP
BEEP
1
SHUTTER
4
POWER SAVE
BEEP
3,4
PLAY
SETUP
1/2
VOLUME
SELECT SET EXIT
MENU
MONITOR
KC42‑PP.book72ページ2002年12月19日 木曜日 午後4時36分