120
SQW0740
4K Photo and Drive Settings
Selecting pictures from 4K burst file and saving
■
Selecting and saving pictures on the TV screen
• Set [HDMI Mode] to [AUTO] or [4K]. When connecting to a TV that does not support 4K
motion picture, select [AUTO].
• Set [VIERA Link] of [TV Connection] in the [Setup] menu to [OFF].
• If you connect the camera to a TV and display 4K burst files on the TV, they will be
displayed only on the 4K burst playback screen.
• Even if you insert the SD card to a 4K-compatible TV with an SD card slot, you cannot
play back 4K burst files recorded with [Aspect Ratio] set to an option other than [16:9].
(As of October 2016)
• Depending on the TV to be connected, 4K burst files may not be played back correctly.
To Next Page
Loading...
Need help?
General
