36
SQW0740
Basics
Buttons/Dials/Levers Used for Recording
Changing the settings assigned to the control ring/rear dial
Changes the settings assigned to the control ring/rear dial.
→ [Custom] → [Ring/Dial Set]
→ [ ] ([Control Ring Operation]) or [ ] ([Rear Dial Operation])
[DEFLT] [Normal] [Photo Style] (→170)
[Zoom]
*
(→140)
[Filter Effect] (→172)
[Step Zoom]
*
(→196)
[Aspect Ratio] (→173)
[Exposure Comp.] (→103) [Highlight Shadow] (→176)
[Sensitivity] (→104) [i.Dynamic] (→177)
[White Balance] (→106) [i.Resolution] (→177)
[AF Mode] (→89) [Flash Mode] (→146)
[Focus Mode] (→87, 99, 100) [Flash Adjust.] (→148)
[Drive Mode] (→126)
[OFF] [Not Set]
*
*
Items that can only be set to the control ring
• To return to the default setting, select [Normal].
• If you do not use the control ring, select [Not Set].
• Under [Highlight Shadow], use the control ring and rear dial.
If [Highlight Shadow] is assigned to the control ring (or rear dial), [Highlight Shadow] will also be
assigned to the rear dial (or control ring).
●
The assigned function setting applies to all the recording modes.
However, the assigned function may not operate when combined with certain recording mode.
To Next Page
Loading...
Need help?
General
