123
SQW0740
4K Photo and Drive Settings
Adjusting the focus after recording ([Post Focus]/[Focus Stacking])
Select the focus point and save the picture ([Post Focus])
1
On the playback screen, select the image with the
[ ] icon and press
• The same operation can be performed by touching [ ].
2
Touch the focus point
• If there are no pictures with the focus on the selected point, a red
frame will be displayed, and pictures cannot be saved.
• The edge of the screen cannot be selected.
Operation Touch operation Description
Touch
Select focus point
• No selection can be made while display is enlarged.
Enlarge display
Shrink display (when in enlarged display)
[Fn1]
Switches to [Focus Stacking] operation (→124)
[Fn2]
In-focus portions are highlighted with colour. ([Peaking])
• Switches in order of [
] → [ ] ([LOW])
→ [
] ([HIGH]).
[MENU/SET]
Save picture
• You can make fine adjustments to the focus by dragging the
slide bar during enlarged display. (The same operation can be
performed using
.)
To Next Page
Loading...
Need help?
General
