68
SQW0740
Recording mode
Taking pictures by setting the aperture value and shutter speed
Easily set aperture / shutter speed for suitable exposure
(One Push AE)
Recording mode:
When the exposure setting is too bright or too dark, you can use one push AE to achieve
a suitable exposure setting.
How to tell if the exposure is not adequate
If the aperture values and shutter speed blink red when the shutter button is pressed halfway.
Blinks red
1
Assign [One Push AE] to the function button (→46)
2
(When exposure is not adequate) Press the function button
Exposure meter
Change to appropriate exposure
1
000
1.42.02.8
250 500 2
000
4
000
●
The exposure meter is not displayed in Creative Video Mode.
●
In the following cases, suitable exposure cannot be set.
• When the subject is extremely dark and it is not possible to achieve adequate exposure by
changing the aperture value or shutter speed
• When recording using the flash
• Preview Mode (→66)
• When [Exposure Mode] is set to [P], [A], or [M] in Creative Control Mode
To Next Page
Loading...
Need help?
General
