144
SQW0740
Stabiliser, Zoom and Flash
Taking pictures with flash
Recording mode:
■
Open/Close the built-in flash
To open the flash
Slide the flash open lever.
• Be careful when opening the flash as the flash will
jump out.
To close the flash
Press the flash until it clicks.
• Be careful not to catch a finger or any other part of
your body or any object when you close the flash.
• Forcibly closing the flash can damage the camera.
• Be sure to close the built-in flash when not in use.
• The flash setting is fixed to [
] (Forced Flash Off)
while the flash is closed.
●
The flash is fixed to [ ] (Forced Flash Off) in the following cases:
• During motion picture recording
• When recording 4K photos
• When recording using [Post Focus]
• When recording burst pictures with [Burst Rate] set to [SH]
• When using the electronic shutter
• When [HDR] is set to [ON]
• When [Silent Mode] is set to [ON]
• When a picture effect in [Filter Effect] of [Filter Settings] is set
To Next Page
Loading...
Need help?
General
