24
SQW0740
Preparations
Inserting and removing the card (optional)
• Make sure that the camera is turned off.
1
Slide the release lever to the
[OPEN] position and open the
card/battery door
Release lever
2
Insert the card all the way
Do not touch the terminal
• Check the orientation of a card
(terminals face monitor).
• Insert the card all the way firmly until
it clicks.
3
Close the card/battery door
and slide the release lever to
the [LOCK] position
■
To remove card:
Press the centre of
the card.
[OPEN] [LOCK]
●
Keep the Memory Card out of reach of children to prevent swallowing.
●
To remove the card, turn the camera off and wait until the LUMIX indicator on the screen goes
off. (Failure to wait may cause the camera to malfunction and may damage the card or recorded
data.)
To Next Page
Loading...
Need help?
General
