290
SQW0740
Others
Message displays
â–
Wi-Fi function
[Failed to connect wireless access point] / [Connection failed] / [No destination found]
• The wireless access point information set on this unit is wrong. Check the authentication type,
encryption type, and encryption key. (→261)
• Radio waves from other devices may block the connection to a wireless access point. Check other
devices that are connected to the wireless access point and devices that use the 2.4 GHz band.
[Connection failed. Please retry in a few minutes.] / [Network disconnected. Transfer stopped.]
• Radio waves from the wireless access point are getting weak. Perform the connection closer to the
wireless access point.
• Depending on the wireless access point, connection may be automatically disconnected after
specific time has passed. Reconnect the connection again.
[Connection failed]
• Change the access point to connect to in the smartphone Wi-Fi settings to this camera.
[Cannot connect to server]
• If a message is displaying asking to update the root certificate, agree to update the root certificate.
â–
Others
[Some pictures cannot be deleted] [This picture cannot be deleted]
• Non-DCF pictures (→161) cannot be deleted. Save needed data on a computer or other device,
and then use [Format] on the camera. (→26)
[Cannot be set on this picture]
• [Print Set], [Title Edit], [Text Stamp], and other functions cannot be used for pictures that are not
compliant with the DCF standard (→161).
[Please turn camera off and then on again] [System Error]
• Turn the camera on again. (Consult the dealer or your nearest Service Centre if display still
remains.)
To Next Page
Loading...
Need help?
General
