38
SQW0740
Basics
Buttons/Dials/Levers Used for Recording
■
Using the level gauge
If you want to make sure that the camera is not slanted or tilted, for example, when you
take a picture of a landscape, use the level gauge indication as a reference.
The yellow line indicates the current angle. Correct the angle of the camera so that it
matches the white line.
Tilting up or down
• In this case, it is facing upward.
Tilting left or right
• In this case, the right side has
dropped.
• When the camera is tilted very little or not at all, the level gauge will turn green.
●
Even when angle is more or less corrected, there may be an error of about ±1 degree.
●
The level gauge may not be displayed correctly or the direction detect function (→30) may not
operate correctly if the pictures are taken with the camera pointing sharply up or down.
During playback
With information
Detailed information
display Histogram display
Without information
([Highlight])
*
100-0001
10:00 1.DEC.2016
100-00011/98
R
G
B
Y
Without information
*
This screen is displayed only when [Highlight] (→194) in the [Custom] menu is set to [ON].
●
Some screens cannot be displayed during playback of certain files, for example motion picture
and 4K burst files.
To Next Page
Loading...
Need help?
General
