EasyManuals Logo
Home>Panasonic>Digital Camera>Lumix DMC-TS1

Panasonic Lumix DMC-TS1 User Manual

Panasonic Lumix DMC-TS1
193 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #114 background imageLoading...
Page #114 background image
Advanced (Recording pictures)
- 114 -
For details on [REC] mode menu settings, refer to P27.
Using one of these modes, jitter during picture taking is detected, and the camera
automatically compensates the jitter, enabling jitter-free images to be taken.
Applicable modes:
·¿
Note
The stabilizer function may not be effective in the following cases.
When there is a lot of jitter.
When the zoom magnification is high.
In digital zoom range.
When taking pictures while following a moving subject.
When the shutter speed becomes slower to take pictures indoors or in dark places.
Be careful of camera jitter when you press the shutter button.
The setting is fixed to [MODE2] with [SELF PORTRAIT] in scene mode and to [OFF] in
[STARRY SKY] in scene mode.
The setting is fixed to [MODE1] in recording motion pictures.
For details on [REC] mode menu settings, refer to P27.
You can take a picture brightly in dark places by setting [MIN. SHTR SPEED] slower. Also,
you can set it faster to reduce the blur of the subject.
Applicable modes:
·
[1/125], [1/60], [1/30], [1/15], [1/8], [1/4], [1/2], [1]
Note
This should usually be set to [1/8 ] to take pictures. (When you select a minimum shutter speed
other than [1/8 ], [ ] appears on the screen.)
Setting [MIN. SHTR SPEED] to slower speed might increase the chance of jitter, so we
recommend using a tripod and the self-timer for taking pictures.
Setting [MIN. SHTR SPEED] to faster speed might make the picture darker, so we recommend
recording the picture in well-lit area. If correct exposure cannot be achieved, [ ] will flash in
red when the shutter button is pressed halfway.
The setting is not available when [INTELLIGENT ISO] is being used.
[STABILIZER]
[OFF]
[AUTO]: The optimum jitter compensation is selected depending on the condition.
[MODE1]: Jitter is always compensated during [REC] mode.
[MODE2]: The jitter is compensated for when the shutter button is pressed.
[MIN. SHTR SPEED]
Minimum shutter speed setting 1/125– 1
Brightness Darker Brighter
Jitter Less More

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic Lumix DMC-TS1 and is the answer not in the manual?

Panasonic Lumix DMC-TS1 Specifications

General IconGeneral
BrandPanasonic
ModelLumix DMC-TS1
CategoryDigital Camera
LanguageEnglish

Related product manuals