Advanced (Recording pictures)
- 74 -
[REC] Mode: ¿
Taking Pictures that Match the Scene Being
Recorded (Scene Mode)
When you select a Scene Mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Set the Mode dial to [¿].
Press 3/4/2/1 to select the Scene Mode.
• You can switch menu screens from any menu item by pressing
the zoom lever.
Press [MENU/SET] to set.
• The menu screen is switched to the Recording screen in the
selected Scene Mode.
∫ About the information
•
If you press [DISPLAY] when selecting a Scene Mode in step 2,
explanations about each Scene Mode are displayed. (If you press
[DISPLAY] again, the screen returns to the Scene Mode menu.)
Note
•
To change the Scene Mode, press [MENU/SET] and then press 1, and return to step 2 above.
• The Scene Mode flash setting is reset to the initial setting when the Scene Mode is changed.
• When you take a picture with a Scene Mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
• The following items cannot be set in Scene Mode because the camera automatically adjusts
them to the optimal setting.
– [INTELLIGENT ISO]/[SENSITIVITY]/[I.EXPOSURE]/[MIN. SHTR SPEED]/[I.RESOLUTION]/
[COLOR MODE]
• Shutter speed for Scene Modes, except [PANORAMA ASSIST], [NIGHT PORTRAIT],
[NIGHT SCENERY], [CANDLE LIGHT], [BABY1]/[BABY2], [PET], [FLASH BURST],
[STARRY SKY], [FIREWORKS] and [HIGH DYNAMIC], will be from 1/4th of a second to
1/1300th of a second.
To Next Page
Loading...
Need help?
General
