- 96 -
Recording
For details on the [Setup] menu settings, refer to P44.
You can display the local times at the travel destinations and record them on the pictures
you take.
•
Select [Clock Set] to set the current date and time in advance. (P27)
Note
•
If you cannot find the travel destination in the areas displayed on the screen, set by the time
difference from the home area.
• The travel destination icon [“] appears when playing back pictures taken at the travel
destination.
• When the [Auto Clock Set] is set to [ON], you can change daylight saving time setting in
[Location] only.
Recording Dates/Times at Overseas Travel Destinations ([World Time])
Select [World Time] from the [Setup] menu, and then press [MENU/
SET].
• When first using the camera after purchasing it, the message appears. Press [MENU/
SET], and set the home area on the screen in step
3.
Press to select [Home], and then press [MENU/SET].
Press / to select the home area, and then
press [MENU/SET].
Current time
Time difference from GMT (Greenwich Mean Time)
• If daylight saving time [ ] is used at the home area, press
. (The time advances by one hour.) Press again to
return to the original time.
Press to select [Destination] and then press [MENU/SET] to set.
• Depending on the setting, the time at the travel destination area or the home area is
displayed.
Press / to select the area the travel
destination is in and then press [MENU/SET] to
set.
Current time of the destination area
Time difference
• If daylight saving time [ ] is used at the travel destination,
press . (The time advances by one hour.) Press again to
return to the original time.
• Exit the menu after it is set.
To Next Page
Loading...
Need help?
General
