- 58 -
Recording
[Rec] Mode: ñ· ¿
Taking Pictures Using the Built-in Flash
Set the flash to match the recording.
Press [‰].
Press / to select a mode and then press [MENU/SET].
The flash is activated twice. The subject should not move until the second flash
is activated. Interval until the second flash depends on the brightness of the
subject.
Photo flash
Do not cover the flash with your fingers or other objects.
Switching to the appropriate flash setting
Item Settings
‡: AUTO
The flash is automatically activated when the recording
conditions make it necessary.
ˆ:
AUTO/Red-Eye
Reduction
The flash is automatically activated when the recording
conditions make it necessary.
It is activated once before the actual recording to reduce the
red-eye phenomenon (eyes of the subject appearing red in the
picture) and then activated again for the actual recording.
• Use this when you take pictures of people in low lighting
conditions.
‰: Forced Flash ON
Š:
Forced ON/Red-Eye
Reduction
The flash is activated every time regardless of the recording
conditions.
• Use this when your subject is back-lit or under fluorescent
light.
‹:
Slow Sync./Red-Eye
Reduction
If you take a picture with a dark background landscape, this
feature will slow the shutter speed when the flash is activated so
that the dark background landscape will become bright.
Simultaneously it reduces the red-eye phenomenon.
• Use this when you take pictures of people in front of a dark
background.
Œ:
Forced Flash OFF
The flash is not activated in any recording conditions.
• Use this when you take pictures in places where the use of
the flash is not permitted.
To Next Page
Loading...
Need help?
General
