ECO MODE SETTINGS
OFF
POWER SAVE
DVI-D POWER MANAGEMENT
OFF
PC POWER MANAGEMENT
OFF
CUSTOMECO MODE
NO SIGNAL POWER OFF
DISABLE
Menu is displayed. (Example: ECO MODE SETTINGS)
Pressing the FUNCTION button clears the menu.
46
FUNCTION BUTTON SETTINGS
Set the functions that operates when is pressed.
Select “FUNCTION BUTTON SETTINGS” in “SETUP” menu and
press
button.
FUNCTION BUTTON SETTINGS
TOUCH-PENFUNCTION BUTTON 1
ON
FUNCTION BUTTON 2
FUNCTION BUTTON GUIDE
SCROLLING BAR
• FUNCTION BUTTON 1, FUNCTION BUTTON 2
The following functions are set to the FUNCTION button.
SCROLLING BAR
Activates the SCROLLING BAR ONLY screensaver.
After 15 minutes, the display enters standby mode.
ECO MODE SETTINGS / SIGNAL / ON/OFF TIMER SETUP /
MULTI PIP SETTINGS
Note:
Factory settings are as follows.
FUNCTION1 button: TOUCH-PEN
FUNCTION2 button: SCROLLING BAR
To exit this mode, press button.
TOUCH-PEN ON
• FUNCTION BUTTON GUIDE
The function display setting for the FUNCTION button is confi gured.
ON: Press the FUNCTION button to display the function list of the button.
OFF: The function list is not displayed.
INPUT (SLOT)* – INPUT (WHITEBOARD)
Simply press to select the input.
* “INPUT (SLOT)” is displayed when an optional Terminal Board is installed.
When a Terminal Board with dual input terminals is installed, “INPUT (SLOT A)” and “INPUT (SLOT B)” are displayed.
TOUCH-PEN
Press
and turn Touch Pen mode ON/OFF.
NETWORK SETUP
“NETWORK SETUP” menu is displayed.
COMPUTER SEARCH
The list of connectable computers on the network is displayed.
MULTI-LIVE
Switch to the MULTI-LIVE mode when using the “Wireless
Manager”.
AV MUTE
Mutes the audio and video. To exit this mode, press any
button.
MULTI PIP ON/OFF
Press
to turn MULTI PIP ON/OFF.
The operation starts.
FUNCTION
1:TOUCH-PEN 2:SCROLLING BAR
Note:
For the network function, refer to “Operating Instructions, Network Operations” and the instruction manual of “Wireless
Manager” in use.
To Next Page
Loading...
Need help?
General