USER MANUAL
R E M O T E C O N T R O L
SENSORS SETTINGS
The system allows to adjust shock/motion/tilt sensors using the remote control.
Shortly press button to enter «SENSOR SETTINGS» menu. Shortly press
button to switch between menu sublevels of the shock/motion/tilt sensors. The
sensitivity of a sensor are increased using button and decreased using
button. Maximum sensitivity value is 50 and minimum is 0
Press and hold button for 1 second to save new sensitivity level.
SHOCK SENSOR SETTINGS
For prompt remote adjusting of shock sensor sensitivity, select «SHOCK SENSOR»
submenu by short presses of button. Short presses of button will cause
switching between functions. To save new settings of shock sensitivity control, shortly
press button.
To enter «Shock sensor warning/alarm level» submenu, shortly press button.
Sensor sensitivity can be set with short presses of and buttons.
To save new settings of the sensor, press and hold button for 1 second.
To exit menu, press and hold button for 1 second.
sensors
adjusting
press to enter the
sublevels
Enter the menu
To Next Page
Loading...
Need help?
General
