25 GB
Historical memory
All measured and calculated values will be automatically stored in
the memory. The values are saved with their unit (length, area or
volume). Calculated values are stored together with the respective
individual values. There are a total of 100 memory locations avail-
able. As soon as all 100 memory locations are occupied, the oldest
memory record will be over-written by newest record.
Calling up a stored memory
Briefly press the memory button
9
to display the latest stored
memory. Memory icon
27
will be displayed on the display and
the respective memory location number will be shown on the
“memory location number row“
19 b
to indicate that the product
has entered the historical memory mode.
Note: The last saved record will always have the memory
location number 01 in the history.
Press the memory button
9
again to go to next memory.
Press and hold the memory button
9
for more than
1.5 seconds will scroll down the memory record fast by jump-
ing the record from 10 to 20 to 30....100.
Note: The data record “100“ will be shown on the display
as “00“ (not (“100“)).
To Next Page
Loading...
