27 GB
Belt pouch
Use the supplied belt pouch to protect the product when not in use
.
Note: Belt pouch can be attached to the belt as shown in fig. E.
Error, faults & troubleshooting
Error
code
Cause Solution
204 Calculation error Refer to user manual, repeat
the procedures.
220 Low battery Replace batteries or charge
the batteries.
255 Received signal too
weak or measurement
time too long
Improve the reflective surface.
(Use white paper.)
256 Received signal too
strong
Improve the reflective surface.
(Don't aim at strong light.)
261 Out of measuring
range
Measuring the distance within
measurement range.
500 Hardware error Switch on / off the product, if
the symbol still appears after
several times, please contact
with your dealer.
To Next Page
Loading...
Need help?
General
