Philips 55PUS9109 User Manual

2.5
Antenna Cable
Insert the antenna plug firmly into the
Antenna
socket at the
back of the TV.
You can connect your own antenna or an antenna signal from
an antenna distribution system. Use an IEC Coax 75 Ohm RF
antenna connector.
Use this antenna connection for DVB-T and DVB-C input
signals.
2.6
Satellite Dish
One Tuner
To watch a satellite channel and to record another channel at
the same time, you must connect 2 identical cables from your
satellite dish to the TV. If you only have 1 cable available, the
channel you are recording is the only channel you can watch.
Connect the cable from the satellite dish directly to the
SAT 1
connection. Use a coaxial cable fit for connecting a satellite
antenna dish. Make sure your satellite dish is perfectly aligned
before you start the installation.
During the satellite installation, select
One Tuner
.
Two Tuners
To watch a satellite channel and to record another channel at
the same time, you must connect 2 identical cables from your
satellite dish to the TV.
Connect the first cable from the satellite dish directly to the
SAT
1
connection and connect the second cable to
SAT 2
. Use a
coaxial cable fit for connecting a satellite antenna dish. Make sure
your satellite dish is perfectly aligned before you start the
installation.
During the satellite installation, select
Two Tuners
.
Unicable or MDU
If you use a Unicable system, connect the cable to the
SAT
1
connection. Use a coaxial cable fit for connecting a satellite
antenna dish. Make sure your satellite dish is perfectly aligned
before you start the installation.
During the satellite installation, select
Two Tuners
and
later
Unicable
.
7

Philips 55PUS9109 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	55 \
Display brightness	450 cd/m²
Native aspect ratio	16:9
LED backlighting type	-
Display diagonal (metric)	139 cm
Screen format adjustments	Zoom
Supported graphics resolutions	3840 x 2160
Motion interpolation technology	PMR (Perfect Motion Rate) 1000 Hz
Audio decoders	DTS, DTS Premium Sound 5.1
RMS rated power	30 W
Built-in subwoofer	Yes
Number of speakers	2
PC in (D-Sub)	No
HDMI ports quantity	4
DVI-D ports quantity	0
USB 2.0 ports quantity	3
Component video (YPbPr/YCbCr) in	1
Consumer Electronics Control (CEC)	EasyLink
Package depth	198 mm
Package width	1369 mm
Package height	1129 mm
Package weight	32300 g
3D type	Active
User memory	1.6 GB
Annual energy consumption	155 kWh
Product color	Black
Panel mounting interface	200 x 200 mm
AC input voltage	110 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.3 W
Power consumption (typical)	112 W
Tuner type	Analog & digital
Analog signal format system	NTSC, PAL, SECAM
Digital signal format system	DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2
Video apps	Netflix, YouTube
Lifestyle apps	Facebook, Google Apps, Skype, Twitter
Operating system version	4.2.2
Operating system installed	Android
Processor cores	6
Audio formats supported	AAC, MP3, WMA
Image formats supported	BMP, GIF, JPG, JPS, PNG, PNS
Video formats supported	3GP, AVC, AVI, H.264, MPEG1, MPEG2, MPEG4, VC-1, WMV9
Subtitle formats supported	ASS, MKV, SMI, SRT, SUB, TXT
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Depth (with stand)	236 mm
Height (with stand)	756 mm
Weight (with stand)	20100 g
Depth (without stand)	33 mm
Width (without stand)	1227 mm
Height (without stand)	714 mm
Weight (without stand)	18400 g