15
3D
15.1
What You Need
This is an active 3D TV. On this TV, you can watch 3D
programmes and movies in full High Definition resolution.
With this TV you view 3D photos in Ultra HD resolution, from
a USB connection. You cannot watch 3D on native Ultra HD
video.
To watch 3D…
• tune to a TV channel that broadcasts programmes in 3D.
• rent a movie in 3D from an online video store.
• play a movie in 3D from a 3D Blu-ray Disc, a USB device or
computer.
Also, to watch 3D on this TV, you will need one of these types
of Philips Active 3D glasses. . .
• PTA507
• PTA508
• PTA509
• PTA517
• PTA518
• PTA519
All types are sold separately. Active 3D glasses from other
brands might not be supported.
15.2
The 3D Glasses
PTA509
Overview
1 -
, On or Off switch.
2 -
Player 1/2
, Player 1 or Player 2 selection.
3 - Receiver lens
4 - Battery compartment
5 - LED light
When you unpack the 3D glasses, also remove the small plastic
foil from the battery compartment.
Switch On and Off
To switch on the 3D glasses, press
.
The glasses need some seconds to adjust to the 3D signal from
the 3D transmitter on the TV. At first use, this may take up to
15 seconds.
Battery Level
You can check the battery level when you switch on the 3D
glasses.
• If the LED light blinks green, you can use the glasses for 4
hours or more.
• If the LED light blinks orange, you can use the glasses for at
least 2 hours but less than 4 hours.
• If the LED light blinks red, the battery is almost empty and less
than 2 hours of 3D watching remain.
Switch Off
To switch off the 3D glasses, press
. The LED light blinks red
4 times. When the 3D glasses do not receive 3D signals for 2
minutes, the glasses switch off automatically.
3D Transmitter
Make sure the receiver lens in the centre of the glasses can
receive the 3D signals.
Also, clear objects away from the 3D transmitter on the TV.
Split Screen Gaming
You can use these glasses to play split screen games. Two
players can watch the same TV but see two different screens to
play a game.
To switch the glasses to watch the Player 1 or Player 2 screen,
switch on the glasses and then press the
Player 1/2
key.
• If the LED light is orange and lits continuously for 2 seconds,
the glasses are set for player 1.
• If the LED light is orange and blinks, the glasses are set for
player 2.
For more information, press the colour key
Keywords
and
look up
Split Screen Gaming
.
49
To Next Page
Loading...
Need help?
General
Weight and Dimensions
