To Next Page

To Previous Page

- 48 -

7. Cleaning and care

Warning: Allow the humidier heater plate and water to cool down for approx-

imately 15 minutes before removing the water tank. A burn may result

from: touching the heater plate, coming in contact with the heated water,

or touching the tank base.

Home cleaning: device exterior, heater plate, and humidier air inlet seal

Clean the device exterior surface weekly.

1. To avoid electrical shock, make sure that the device is disconnected from all outlets and

power sources. Remove any cables attached to the device or battery pack.

2. Remove the humidier tank from the device.

3. Use a lint-free cloth dampened (not dripping) with a liquid soap solution (1 teaspoon

of liquid dish soap per gallon of warm water) to clean the exterior of the device, heater

plate, and humidier air inlet seal.

4. Work the cloth into the areas around the therapy button, humidier air inlet/outlet seal,

and any other areas where soil may be dicult to remove. Ensure that you remove all

visible soil.

5. Use a lint-free cloth dampened (not dripping) with clean water to remove all detergent

residue.

6. Inspect the device for cleanliness. If necessary, repeat the cleaning steps until all

surfaces are visibly clean.

7. Allow the device to dry completely before reconnecting it to a power source.

8. Inspect the device and all circuit parts (lter, tube, and mask) for damage, such as cracks,

tears, or broken pieces. Replace any damaged parts.

Home cleaning: humidier water tank (lid, water tank base, and water tank seal)

Clean the humidier water tank before rst use. Hand wash daily. The humidier water tank

can also be washed in the dishwasher weekly.

1. Press the therapy button to stop the airow, and allow the heater plate and water to

cool.

2. Remove the water tank from the device and remove the lid and water tank seal from the

tank base.

Philips DreamStation 2 User Manual

Other manuals for Philips DreamStation 2