SETTING THE VEHICLE IN MOTION
With engine running at idling speed declutch and rotate the gear change twist grip to 1st
gear position (fig. 8). To set the vehicle in motion slowly let - out the clutch and
contemporaneously rotate the throttle.
GEAR CHANGE
Close the throttle, declutch and rotate the gear change grip to a higher or lower gear as
the case may be (fig. 8).
STOPPING THE ENGINE
Before stopping the engine shift to <<neutral>> then press the engine cutout push - button
<< M>> (fig. 6).
Notice - Don't use the choke when the engine is warm.
Fig. 8 – Operations for starting
A. Open the fuel cock - B. Selector neutral - C. Pull out the starter control rod (with cold
engine) - D. Bring throttle twist grip to idling position - E. Act on kick-starter.
To Next Page
Loading...
Need help?
General