Pima FORCE Series User Manual

Communication
PIMA Electronic Systems 19
control panel will first try to notify the contact through the main path, and will use the backup
path if it fails.
8.1.2 Communication Test
 Path: select a contact’s path to be tested.
 Press to Start: press and check that a notification is received by the contact.
8.2 PIMA Cloud
User Menu  Communication  PIMA Cloud
To use the PIMAlink 3.0 app to control the alarm system remotely, you will need to pair it with
the cloud, receive a pairing code and use it for pairing the mobile phones of whoever will use
the application. The pairing process is short. Before you pair the alarm system, make sure all
the app users download and install it on their phones.
The pairing code must be used within 10 minutes, or you will have to repeat the process and
receive a new code (for mobile phones that have not been paired).
1)  Pair to PIMAlink: press and wait (shortly) for the code to appear on the screen.
Immediately enter the code in the pairing screen of the PIMAlink app, in every phone.
2)  Unpair: press and disconnect FORCE and all your mobile phones from the cloud.
8.3 Phone Notifications
User Menu  Communication  Phone Notifications
When the alarm is set off, FORCE calls the contact that is set to receive notifications, and sounds
an alarm sound over the phone.
Parameter
Description
Default
Range (sec)
Alarm Sound
The length of the alarm sound
30 sec
5-120
Repeat Massage
No. of times to redial and sound the notification
2
1-8
8.4 Remote Service
User Menu  Communication  Remote Service
Use the Remote Service menu when the service technician or CMS need to connect to the alarm
system remotely. Go directly to this menu by pressing and holding key ‘6’ on the main menu
12
.
 “Remote Service” and “CMS Registration” (next) allow connecting
and controlling the alarm system. Only allow authorized technician
to use these options!
 The CMS/Technician can connect to the system remotely only using
a remote connection code.
Parameter
Description
 Allow Access
Now
When you press this menu, you allow a (authorized) technician to connect to
the alarm system and control it remotely.
 Over Network
 Over Cellular
1) IP/URL: enter the data in the form of IP:Port (no space) when asked by
a (authorized) technician.
12
System version 1.2 and higher

Pima FORCE Series Specifications

General

Brand	Pima
Model	FORCE Series
Category	Security System
Language	English