Pima FORCE Series User Manual

Table of Contents
PIMA Electronic Systems 3
9.9 System Information .................................................................................. 24
Chap. 10 Partitioning ............................................................................... 25
10.1 Optional uses .......................................................................................... 25
10.2 How to clean the LCD screen ..................................................................... 26
Appendixes
Appendix A Troubleshooting Faults ....................................................... 27
Appendix B Glossary ............................................................................. 29
Appendix C Zone Number and Location ................................................. 31
Safety Instructions. Read Carefully!
 Hazards of fire and electric shock exist in this alarm system. To reduce the risk of fire or electric
shock, do not expose this alarm system to rain or moisture. Pay attention: Telephone cords could
be a good conductor for lightings energy.
 Warning: this equipment has no mains On/Off switch. The plug of the direct plug-in power supply
is intended to serve as the disconnecting device.
 Dangerous high voltages are present inside the control panel’s enclosure. Refer servicing to
qualified personnel only.
 This alarm system should be used with 230VAC/110VAC, 50/60Hz, protected by anti-electric
shock breaker. Use only the power supply provided with this equipment. Use of unauthorized
power supplies may cause damage.
 Do not spill liquid of any kind onto the unit. If liquid is accidentally spilled onto the unit,
immediately consult a qualified service.
 Disposal of used batteries must be made in accordance with local waste recovery and recycling
regulations.
Default Codes
Master User: 5555
Master Installer: 1234
Signs in this guide
Warning
Note
Enter sub-menu, select/deselect, save selection.

Menu with sub-menus (on the display)

Menu with sub-menus (in this guide)

Options menu
Return/Esc, Cancel

Selectable parameter (enabled/disabled)
#/*
Scroll between zones, partitions, users, etc.

Pima FORCE Series Specifications

General

Brand	Pima
Model	FORCE Series
Category	Security System
Language	English