2003 Pioneer 1200/1200SE Gasoline Vehicle Maintenance and Service Manual Page 2-1
2
SECTION 2 – VEHICLE SPECIFICATIONS
SPECIFICATIONS
PIONEER 1200 PIONEER 1200 SE
POWER SOURCE
Engine:
4-cycle OHV, 400 cc, 13 hp rated, single-cylinder, air-cooled, with pressure lubrica-
tion system
••
Fuel system:
Side-draft carburetor with float bowl, fixed jets, fuel filters, and impulse fuel
pump
••
Governor:
Automatic ground-speed sensing, internally-geared in unitized transaxle • •
Ignition:
Transistor electronic ignition with electronic RPM limiter • •
Unitized transaxle, MC012C-AS00:
Fully synchronized forward and reverse with neutral
(14.9:1 forward, 20.5:1 reverse) and differential lock feature
••
Electrical system:
12 volt, 500 cca at 0 °F (-17.8 °C), 650 at 32 °F (0 °C). 105-minute
reserve capacity and 35-amp charging capacity
••
Torque converter:
Automatic, variable-speed, dry type • •
STEERING/SUSPENSION/BRAKES
Steering:
Self-adjusting rack and pinion, Ackerman • •
Suspension:
Front:
Independent A-arms with coil-over shocks
Rear:
Semi-independent suspension with multi-leaf springs and dual hydraulic shocks
••
Brakes:
Hydraulic brake system – self-adjusting drum brakes on each wheel with separate
hand-operated park brake
••
BODY/CHASSIS
Frame/Chassis:
Twin I-Beam welded aluminum • •
Side and rear body:
All aluminum with a powder-coated steel cargo bed •
Side and rear body:
All aluminum with an aluminum cargo bed •
Front body:
ABS/DR acrylic cap ••
Tires:
23 x 10.50 - 12 tubeless, 4-ply rated load range, front and rear • •
DIMENSIONS/WEIGHT
Overall length
(with box bed) 123.4 in. (313.4 cm) 144.4 in. (366.8 cm)
Overall width
54 in. (137 cm)
Overall height
(at steering wheel) 51 in. (130 cm)
Overall height
(at light bar) 75.3 in. (191 cm)
Wheelbase
80 in. (203 cm) 101 in. (256 cm)
Ground clearance
:
under differential
under foot platform
6.6 in (17 cm)
11.4 in (29 cm)
Front wheel tread
43 in. (109 cm)
Rear wheel tread, MC012C-AS00 transaxle
44.5 in. (113 cm)
Weight
(dry):
with all-terrain tread
with turf tread
1106 lb. (501.7 kg)
1066 lb. (477.2 kg)
1200 lb. (544.2 kg)
1160 lb. (526.0 kg)
Forward speed
17-19 mph (27-31 km/h)
Governed RPM
3850 (±30) RPM
Curb clearance circle
(diameter) 24 ft. 1 in. (734 cm) 31 ft. 8 in. (965 cm)
Turning radius
(per SAE J 695) 139.6 in. (355 cm) 15 ft. 6 in. (472.4 cm)
Intersecting aisle clearance
112.2 in. (285 cm) 120 in. (304 cm)
Specifications continued on next page...
To Next Page
Loading...
Need help?
General