Pioneer Kuro Elite PRO-101FD User Manual

37
En
05
Additional Picture Adjustment Options
Lighten Side Masks
If content appears with bars (side masks) on each side of a picture when the screen size is 4:3 and Side Mask
Detection is active, the bars automatically change from black to gray. However, the gray is fairly dark. To change
the bars to a lighter shade of gray, follow the steps below.
1 ) Access
Side Mask through the Screen menu.
2 ) Select
Brightness Sync. from the submenu.
3 ) Select the desired parameter.
4 ) Press HOME MENU to exit the menu.
Restore Default Screen
To restore the factory default screen settings, follow the directions below.
1 ) Access
Reset through the Screen menu .
2 ) Press ENTER to continue with the screen reset.
3 ) Use the arrow buttons to highlight
Yes.
4 ) Press ENTER.
All screen settings return to the original default values.
5.3.2 Select a Color Temperature Level
Use this option to adjust the color temperature for a better white balance. To adjust the white balance, follow the
directions below.
1 ) Access
Color Temp through the Picture menu .
2 ) Select the desired parameter from the submenu.
To manually adjust the white balance, continue with the following Steps.
3 ) Select
Manual in Step 2.
4 ) Press ENTER to confirm.
5 ) Use the right arrow button to adjust the balance.
The manual adjustment screen appears.
6 ) Select an option to adjust.
Parameter Description
Fixed sets the same brightness for gray side masks
Auto adjusts the side mask brightness according to the
brightness of screen images
Parameter Description
High white with bluish tone
Mid-High intermediate tone between High and Mid
Mid natural tone
Mid-Low intermediate tone between Mid and Low
Low white with reddish tone
Manual adjusts to your preference
PRO-141FD_PRO-101FD.book Page 37 Monday, May 12, 2008 3:27 PM

Pioneer Kuro Elite PRO-101FD Specifications

General

Brand	Pioneer
Model	Kuro Elite PRO-101FD
Category	Flat Panel TV
Language	English