62
VSX-821-K
1
2 3 4
A
B
C
D
E
F
1
2 3 4
8. EACH SETTING AND ADJUSTMENT
8.1 ADJUSTMENT REQUIRED WHEN THE UNIT IS REPAIRED OR REPLACED
• If the adjustment is shifted or if it becomes necessary to readjust because of part replacement, etc., perform the
adjustment as described below.
• Any value changed in Adjustment mode will be stored in memory as soon as it is changed. Before readjustment, take note of
the original values for reference in case you need to restore the original settings.
• Use a stable AC power supply.
AMP Assy "8.3 IDLE CURRENT ADJUSTMENT" (All channel)
Other assemblies No adjustment required
When any of the following assemblies is replaced
AMP Assy "8.3 IDLE CURRENT ADJUSTMENT"
(Only channel of replacement parts)
Other assemblies No adjustment required
When any of the following parts is replaced
To Next Page
Loading...
Need help?
General
Weight and Dimensions
