Polaris P965iQ User Manual

Page 16
English
Using the Control Unit
The control unit can be used to initiate basic cleaning features and to connect the device to home
Wi-Fi. For more information on connecting your cleaner to Wi-Fi functions, see section 5, Installing
iAquaLink
™
.
F
o
r
t
e
c
h
n
i
c
a
l
s
u
p
p
o
r
t
c
a
l
l
1
-
8
0
0
-
8
2
2
-
7
9
3
3
Wi-Fi to Phone
Button
Dirty Canister
Indicator
Lit when in Wi-Fi to Phone Mode
LED: Direct Connection (RED)
Lit to Conrm Connection.
LEDs: LAN Connection (RED)
WEB Connection (RED)
View Time Remaining
and Error Display
Use to Remove
Cleaner
from Pool
(Easy Lift)
Start/Stop Cleaner
Operation
Select Cleaning Surface
• Floor
• Floor and Wall
• Waterline
Figure 15. Cleaner Control Unit
Start / Stop Cleaning
The factory default cleaning surface setting is Floor and Wall .
Use to change cleaning surface setting.
Toggle between: Floor Only , Floor and Wall and Waterline only
With cleaner submerged in the water, press to begin operation.
The control box will display the time remaining for the selected cycle in hours and minutes.
NOTE: The control box automatically goes into standby mode after 10 minutes and the display screen turns off. Press any key
to exit standby mode and view remaining cycle time. Cleaner will continue to function in standby mode.
Press to interrupt and cancel an in-progress cleaning cycle.

Polaris P965iQ Specifications

General

Brand	Polaris
Model	P965iQ
Category	Vacuum Cleaner
Language	English