Page 26
English
Figure 19. Unplug
4. Remove the cleaner from the pool and untangle all kinks and coils in the
power cable (Figure 20). Start at the cleaner head. Lay the cable in the sun
to loosen any tangling memory.
Figure 20. Untangle
Clean the Filter Canister
The lter canister should be cleaned at the end of each cycle.
1. Remove the cleaner from the water using the Lift System and let the
remaining water drain.
2. Set the unit on four wheels.
3. Push the cover lock (1) and lift the cover (2) until it is secured in the vertical
position. (Figure 21).
To Next Page
Loading...
Need help?
General
