Page 19
English
13. On the next screen, click "Select" if you want to be the Primary User.
The Primary User will have access to all cleaner functions in the app.
The Primary User can invite or remove people (family members, service
providers etc.) to allow them access to cleaner functions and programming.
Click "Skip" if you do not want to be the Primary User.
NOTE: Send Invite Code - you can only send invite codes if you are set up as the Primary User.
Sending an invite codes to friends and family will allow them to access the cleaner app
functions and programming. If you choose to Skip this step, the Primary User can always
send Invite Codes at a later time by accessing the System Settings Screen.
6 iAquaLink
™
Control
Once you have downloaded the iAquaLink app and connected the device to
Wi-Fi, the iAquaLink app allows for robotic cleaner control from anywhere,
anytime with access to advanced features, additional programming options and
troubleshooting advice.
WARNING
Do not enter pool while the robotic cleaner is in water.
The Home Screen
Robot ABC
Cleaning
Remote Control Cleaning Mode Lift System
NEXT CLEANING: Monday, 12:00 pm
FULL
STOP
30
30
00:21
#E5E5E5
#434B58
#2A3D56
#141E2E
#F26522
Next Scheduled
Cleaning Time
Dirty Canister
Indicator
Increase Cleaning
Cycle 30 Minutes
Current
Cleaning Mode
Start / Stop
Cleaning
View Cycle Time
Remaining
Remote Control
Mode
Set Cleaning
Mode
Lift System
Mode
Decrease Cleaning
Cycle 30 Minutes
System
Name
System
Settings
Cleaner
Status
NOTE: Image of screen layout is subject to change due to periodic updates to the app.
To Next Page
Loading...
Need help?
General
