Polaris Scrambler 50 User Manual

ELECTRICAL
5.14
6. Reinstall the starter motor to the engine.
ELECTRONIC THROTTLE
CONTROL (ETC)
SWITCH
The Electronic Throttle Control (ETC) system is
designed to limit the engine RPM in the event of a
mechanical problem with the throttle mechanism.
The ETC switch is mounted independently of the
throttle actuator lever inside the throttle block
assembly. This is a normally open switch, and is held
in the closed position by throttle cable tension. In the
event of a mechanical problem in the throttle
mechanism(cable tensionis lost), the switch contacts
open, connecting the CDI grey wire from ground,
limiting engine RPM to 1500.
Electronic Throttle Control (ETC) Switch
ETC Micro Switch
Button
A
(Cast Aluminum Throttle
Housing)
Ill. 1
Electronic Throttle Control
Throttle is
Open
ETC Switch is
Closed. Connec-
tion from Grey to
Black.
Throttle is
Closed
ETC Switch Open.
NO connection
from Grey to
Black.
In the Event of
Cable Slack
With cable slack
the ETC is open,
there is NO con-
nection from grey
to black, the En-
gine RPM is limit-
ed to 1500 RPM.
Throttle Open
Throttle Closed
Enfocus Software - Customer Support

Polaris Scrambler 50 Specifications

General

Brand	Polaris
Model	Scrambler 50
Category	Offroad Vehicle
Language	English