FUEL
AND
Qlb
RECOMMENDATIONS
Gasoline: Use regular unleaded gas-
oline; minimum
87
octane.
Oil: Use only Polaris Watercraft
TC-W3 Oil, Polaris Injection Oil, (red)
or NMMA Certified TC-W3 Oil.
The use of non-recommended fuel or oil could result in engine component and fuel
system deterioration and will void your warranty.
Since this watercraft features an oil injection system
it
is not necessary to pre-mix
the gasoline and oil. The only deviation from this
isduring the engine break-in peri-
od (see page 36).
Refueling
Keep the watercraft horizontal while fueling. Shut fuel valve off. Carefully remove
the gas cap.
Use fresh, seasonal gasoline which has been stored in a clean container. To get
the best performance from gasoline only purchase what is needed for a month or
less of operation.
Always stop the engine before refueling. Disconnect the lanyard lock plate from
the engine stop switch.
The use of a funnel or flexible spout will help avoid gasoline spillage on the water-
craft. Always wipe spills off immediately.
To Next Page
Loading...
Need help?
General
