Polaris SLT780 1996 User Manual

As with all watercraft, proper lubrica-
tion and corrosion protection are
necessary to maintain performance
and ensure years of service.
For greasing the Polaris watercraft
use a marine grease
(water-resis-
tantlsalt-resistant E/P type, PN
2871
066).
Throttle Cable And Choke
Cables
1.
Lubricate the throttle cable and
choke cable inner cables using
Polaris cable lube PN 287051 0.
2.
Depress the throttle lever and
squirt Polaris cable lube onto
the cable.
3.
Push and release the throttle
several times to work the
lubricant down the cable.
Steering Cable Joints And
inner Wire
1. Lubricate the steering cable
joints on the steering nozzle
end using Polaris cable lube PN
2870510.
2.
Expose the steering cable inner
cable and apply Polaris cable
lube to it. Lubricate the steering
nozzle end and the handlebar
end.
NOTE: Cable seals can be moved
to allow oil into the cable. Make sure
seals are put back in proper location
after oiling.
ubricate
/'-

Polaris SLT780 1996 Specifications

General

Brand	Polaris
Model	SLT780 1996
Category	Boat
Language	English