131
MAINTENANCE AND LUBRICATION
Cleaning and Storage
Cleaning the ATV
Keeping your ATV clean will not only improve its appearance but it
can also extend the life of various components. With a few
precautions, your ATV can be cleaned much like an automobile.
Washing the ATV
If a high pressure type car wash system is used, extreme care must be
taken to avoid water damage to the wheel bearings, transmission seals,
body panels, brakes and warning labels. Many expensive repair bills
can result from using high pressure detergent systems.
NOTE: If a high pressure car wash is used, grease all zerk fittings
immediately after washing. Also run the vehicle to evaporate any
water that might have entered the engine or exhaust system.
The best and safest way to clean your ATV is with a garden hose and a
pail of mild soap and water. Use a professional type washing mitten,
cleaning the upper body first and the lower parts last. Rinse with water
frequently and dry with a chamois to prevent water spots. NOTE: If
warning labels are damaged, contact your a Polaris dealer for free
replacement.
Waxing the ATV
Your ATV can be waxed with any non-abrasive automotive paste wax.
Avoid the use of harsh cleaners since they can scratch the body finish.
Certain products, including insect repellants and chemicals, will
damage plastic surfaces. Care must be taken when using these
products near plastic surfaces.
CAUTION
To Next Page
Loading...
Need help?
General
