134
MAINTENANCE AND LUBRICATION
Transporting
Whenever the ATV is to be transported the following measures should
be taken.
1. Turn off the engine and remove the key. It may be lost if not
removed.
2. Turn the fuel valve to off.
3. Be certain the fuel cap, oil cap, and seat are installed correctly.
4. Always tie the frame of the ATV to the transporting unit securely
using suitable straps or rope.
5. Always place the transmission in park and lock the parking brake.
Tool Kit
To help you perform routine maintenance, a tool kit is provided in the
storage compartment under the seat. Items included in the kits are:
Screwdriver
Open end wrench (8-10 mm)
Open end wrench (12-14 mm)
Box end wrench
Tire pressure gauge
Spark plug wrench and handle
Spanner wrench for adjusting rear shock spring preload
Torx driver for rack removal
To Next Page
Loading...
Need help?
General
