EN-15
Choosing the Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
1. Press the MENU button.
2. Select [Setup] menu with the f button.
3. Select [Language] with the c / d buttons, and
press the OK button.
The Language setting screen will be
displayed.
4. Select the displayed language with the c / d
buttons, and press the OK button.
The setting will be stored.
To exit from any menu selection, press the W button.
Formatting the Memory Card or Internal Memory
This utility formats the internal memory (or memory card) and erases all stored images
and data.
1. Press the MENU button.
2. Select [Setup] menu with the f button.
3. Select [Format] with the c / d buttons, and
press the OK button.
4. Select [Execute] with the c / d buttons, and
press the OK button.
To cancel formatting, select [Cancel] and
press the OK button.
HZ
Format
Next Menu
Beep
Language
Auto Off
Sys. Reset
Light Freq.
On
English
3 Min.
Next Menu
50Hz
Setup
Format
Cancel
Execute
HZ
Format
Next Menu
Beep
Language
Auto Off
Sys. Reset
Light Freq.
On
English
3 Min.
Next Menu
60Hz
Setup