Poly SYNC 20 Series User Manual

To check battery status:
• With speakerphone inactive, tap the Power button to hear battery status
• With speakerphone inactive, tap any button to view the LED bar
Battery status LEDs
LED bar Battery status
Solid white long bar Battery full
Solid white medium bar Battery high
Solid white short bar Battery medium
Solid red Battery low
Red flashes Battery critical
NOTE LEDs do not illuminate in standby mode.
Charge the speakerphone via USB using your computer or a wall charger (not provided).
The LED bar pulses while charging and turns solid white when fully charged. Allow 4 hours
for a full charge.
NOTE For faster charging, connect to a wall charger or to your computer's quick-charge USB
port, if available.
With the speakerphone powered on, charge your phone by connecting your phone's
charge cable to the speakerphone USB-A port (cable not provided).
Mobile
Computer
Blutooth
NOTE Speakerphone battery level must be medium or higher.
NOTE Connection provides power only.
Charge
Check battery status
Charge
Charge your mobile
phone
10

Poly SYNC 20 Series Specifications

General

Brand	Poly
Model	SYNC 20 Series
Category	Telephone
Language	English