Polycom CX700 User Manual

User Guide for the Polycom CX700 IP Phone
2 - 10
3 Enter your old PIN, then enter your new PIN twice.
4 Press the OK soft key to save your changes or the Cancel soft key to exit
the Change PIN screen without making changes.
For more information on changing your the fingerprint and the fingerprint
reader, refer to Logging in on Your Phone on page 1-8.
Switching Users
To switch to another user:
1 Press the Settings soft key.
2 Select Switch User.
The Sign In screen appears on the graphic display.
3 Using the graphic display’s soft keyboard, enter the following:
— The new user’s Microsoft Office Communicator sign-in name
— The new user’s network domain and username
— The new user’s password
For more information, refer to Logging in on Your Phone on page 1-8.
4 Select Sign In.
The Confirm PIN screen appears.
5 Enter the new user’s six digit personal identification number (PIN) using
the dial pad, then re-enter the same PIN, and then press the OK soft key.
The new user’s contact list screen appears.
Calibration of Touch Screen
To calibrate the touch screen:
1 Press the Settings soft key.

Polycom CX700 Specifications

Power

power over Ethernet	IEEE 802.3af Class 2
maximum power consumption	13 Watts

LCD Display

display size	5.7 inches
display type	amorphous-TFT Active-Matrix Transmissive
display resolution	320x240

Audio

frequency response	30 – 20kHz
signal-to-noise ratio	78 dB (@ 1kHz)
dynamic range	>80 dB (@ 1kHz)
total harmonic distortion + noise	<0.08% (@ 1 kHz)

Operating Environment

operating temperature range	-10°C to 40°C
relative humidity	80% max (non-condensing)
operating altitude range	-304.8 meter to 3962.4 meter

Weight and Dimensions

dimensions when not tilted	252.7 x 268.6 x 91.3 mm
dimensions when tilted up	193.2 x 268.6 x 192.1 mm
unit weight	2.1 kg
handset weight	200 g
shipping weight	2 kgs