EasyManuals Logo
Home>Polycom>IP Phone>CX700

Polycom CX700 User Manual

Polycom CX700
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
User Guide for the Polycom CX700 IP Phone
3 - 2
If you require additional information or assistance with your new phone,
contact your system administrator.
Placing Calls
You can place a call in many ways using your Polycom CX700 IP phone:
Dial the number using the dial pad with the handset off-hook or on-hook.
Select a contact from the contacts list shown on the graphic display.
Select a contact from the contacts list using the Scroll Wheel, then press the
Select key (at the center of the Scroll Wheel).
During a call, you can alternate between Handset, Headset, or Speakerphone
modes by pressing the Speakerphone or Headset keys, or picking up the
handset.
Call duration on an active call is monitored through a local call timer. This is
visible within the active call window on the graphic display. In the figure
below, the call to Peter Krebs has just started.
To place a call using the handset:
>> Do the following steps in any order:
Pick up the handset.
Note
You need to log in to place all outgoing calls or answer incoming calls. With regard
to the placement of emergency calls, consult your system administrator.
Only four simultaneous calls can be displayed on the graphic display at any time.

Table of Contents

Other manuals for Polycom CX700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom CX700 and is the answer not in the manual?

Polycom CX700 Specifications

Power IconPower
power over EthernetIEEE 802.3af Class 2
maximum power consumption13 Watts
LCD Display IconLCD Display
display size5.7 inches
display typeamorphous-TFT Active-Matrix Transmissive
display resolution320x240
Audio IconAudio
frequency response30 – 20kHz
signal-to-noise ratio78 dB (@ 1kHz)
dynamic range>80 dB (@ 1kHz)
total harmonic distortion + noise<0.08% (@ 1 kHz)
Operating Environment IconOperating Environment
operating temperature range-10°C to 40°C
relative humidity80% max (non-condensing)
operating altitude range-304.8 meter to 3962.4 meter
Weight and Dimensions IconWeight and Dimensions
dimensions when not tilted252.7 x 268.6 x 91.3 mm
dimensions when tilted up193.2 x 268.6 x 192.1 mm
unit weight2.1 kg
handset weight200 g
shipping weight2 kgs

Related product manuals