Polycom CX700 User Manual

3 - 1
3
Using the Basic Features of Your
Phone
Your Polycom® CX700 IP phone is designed to be used like a regular phone.
You place calls, transfer a call to someone else, or conduct a conference call.
At any time, only one active call may be in progress on your phone. The active
call is the one that has audio associated with it. There may be one other call on
hold or in an “Incoming call” or “Ringing” state. Use the Scroll Wheel or the
touch screen to switch between these calls.
This chapter provides basic operating instructions for the Polycom CX700 IP
phone. This chapter contains instructions on:
• Placing Calls
• Answering Calls
• Ending Calls
• Redialing Numbers
• Muting the Microphone
• Adjusting the Call Volume
• Placing Calls on Hold
• Hosting Conference Calls
• Joining Meetings
• Transferring Calls
• Forwarding Calls
• Using Voice Mail
• Changing Your Presence Information
• Restarting Your Phone
To customize your phone, refer to Customizing Your Phone on page 2-1. To
troubleshoot issues with the phone, refer to Troubleshooting Your Phone on
page 4-1.

Polycom CX700 Specifications

Power

power over Ethernet	IEEE 802.3af Class 2
maximum power consumption	13 Watts

LCD Display

display size	5.7 inches
display type	amorphous-TFT Active-Matrix Transmissive
display resolution	320x240

Audio

frequency response	30 – 20kHz
signal-to-noise ratio	78 dB (@ 1kHz)
dynamic range	>80 dB (@ 1kHz)
total harmonic distortion + noise	<0.08% (@ 1 kHz)

Operating Environment

operating temperature range	-10°C to 40°C
relative humidity	80% max (non-condensing)
operating altitude range	-304.8 meter to 3962.4 meter

Weight and Dimensions

dimensions when not tilted	252.7 x 268.6 x 91.3 mm
dimensions when tilted up	193.2 x 268.6 x 192.1 mm
unit weight	2.1 kg
handset weight	200 g
shipping weight	2 kgs