Proceq PAROTESTER 2 User Manual

English
© 2012 Proceq SA
In online mode the measured data are uploaded to the
PC after every roll or series of measurements. Online
upload to the PC is carried out manually when the
«END» key is pressed or automatically.
Manual online upload:
The data are always uploaded manually when the
«END» key is pressed if n = 0 in the «Mean value» menu.
Automatic online upload:
The data are uploaded automatically if the number of
measurements are pre-programmed. Entry of the num-
ber of measurements can be set in the «Mean value»
menu ( n = XXX ).
Data format ( protocol) and sequence of data for on-
line data upload to the PC
The data format is: Baudrate: 9600 / Data bits : 8 / Stop
bits: 1 / Parity: None / Protocol: None The data are
uploaded to the PC in the following sequence:
7.4 Online data upload to the PC
( with own user program)
Press the «MENU» key to return to the main menu
where the «Data output» menu item can be selected with
the arrow keys ( h / i ) ( Fig. 48 ). Press the «START» key
to enter the data output menu ( Fig. 49 ).
Select the «Online PC / Printer» menu item with the arrow
keys ( h / i ). Press the «START» key. The online mode
for PC or printer can be selected with the arrow keys
( g / f). Online mode for the PC is selected by pressing
the «END» key ( Fig. 50 ).
Fig. 48 Fig. 49 Fig. 50
Data output 19

Proceq PAROTESTER 2 Specifications

General

Brand	Proceq
Model	PAROTESTER 2
Category	Test Equipment
Language	English