COMPASS MODE
Users have the option to exit the default orientation (Blue lights at the front,
Yellow lights at the back). In Compass Mode, users can operate the drone
without orientation. Regardless of where the drone is pointing, it will turn left
or right according to the remote’s command.
Compass Mode is good for beginners and is useful for drones that fly too far
away for the user to be able to tell the orientation.
Follow the below instructions to change to Compass Mode:
1. After syncing the drone and calibrating the GPS, make sure the front of the
drone is facing away from you.
2. Press in on the throttle stick once. The remote will beep twice and the
drone’s back left and front right lights will start to flash. This indicates that
the drone is now in Compass Mode.
3. Press in on the throttle again to leave Compass Mode.
10
FRONT
To Next Page
Loading...
Need help?
General
